The Best Camera Tripod


What is tripod?
Tripod is one kind of camera stand used to hold a camera. In photography, tripods are also used for stabilization and elevate a camera. All the photographic tripods have three legs and a mounting head to hold the camera. On the mounting head of tripod usually, contain a thumbscrew that meets to a female threaded receptacle on the camera and a rotatable mechanism on the tripods mount that can tilt the camera when it’s mounted on the tripod. Tripods are generally made of high-grade aluminum, steel, wood, plastic or carbon fiber.

Usage of a tripod:
Photographers use the heavy telephoto lens on their camera to get a very sharp photo and tripod are use to hold the heavy lens and camera to stabilize. Tripods are usually used for both still and motion photography to stop camera movement.
Tripod is extremely necessary when an extreme focal length of a lens is use or slow-speed exposure are being made cause any camera movement will produce a blurred image while the shutter is open.
In the same pose, photographer reduce the camera shake, and in this way instrumental in achieving maximum sharpness.
A tripod is very helpful to get precise framing of the photo and also help to get more than one image from the same scene. For example when bracketing the exposure.
In photography, use a tripod may also allow a more thoughtful to photography.

Tripod variation:
There are several types of tripods available in the market. Generally tripods are made of aluminum, steel, wood, or plastic is primarily used for photographer video and still camera and cost is less than the US $50. Tripods generally come with mount head and rubber feet attached. Tripods have a common feature that allows the mount head to flip sideways up to 90 degrees that camera can take the photo in portrait format . also include a small pin on the front of the mount head screw used to stabilize camcorders.
In the market, some expensive tripods are available made from carbon fiber. This type of tripods is generally come with no adjusted mount head. Carbon fiber makes its very strong and hearty and also lightweight. Expensive tripods have some extra advantages, like as reversible center post thus the camera can be mounted between the tripod’s feet and feet that can set several different angles and its allowing take shots from a low position.
Tablepods named a small tabletop tripod which is available in the market. The tablepods have used some kind of situations when a big camera tripod is too much heavy to carry and its alternative is a ball head integrated to a c-clamp called clamp-pod.

Tripod heads:
The head is the integrated part of tripod mounted on tripods. Sometimes the head is separate-able and the head allows for the camera to be aimed.
The heads are generally two different types Ball head and pan-tilt head.

Ball head:
The ball head has a ball lock knob and allows to camera movement of all axes of rotation from a single point that showing panoramic rotation. Some ball heads also have a separate panoramic rotation axis on the base of the head. The tripod head has mainly two parts, a socket which attaches to the tripod base of the head and a ball which attaches to the camera. The camera is attached to the ball with a quick release plate, or a simple UNC 1/4″-20 screws. The socket is where the ball rotates in, and also contains the controls for locking the ball.  The socket contains a slot on the side, to permit the camera to be turned to the portrait orientation. Ball heads are available in varied types of quality. Some have only 1 control for both ball and pan lock. whereas others have individual controls for the ball, pan, and additionally ball friction. Ball heads are used once a free-flow movement of the camera is required. they’re adding more stable and can hold heavy loads, than pan-tilt heads. However, ball heads have the disadvantage that only 1 control is available to permit or stop the movement of all axes of rotation, thus if the camera is tilted on one axis, there is also a risk of tilting on the opposite axes additionally. once a movement of 1, or 2 axes or rotation is required, a pan-tilt head is used.

Pan-tilt head
A 3-way pan-tilt head on a stand, showing bird’s-eye rotation, lateral tilt, and front tilt controls
The pan-tilt head has separate axes and controls for tilting and panning, so an explicit axis are often controlled while not a risk of poignant the opposite axes. These heads are available in 2 sorts, 2-way and 3-way. two-way heads have 2 axes and controls, one for bird’s-eye rotation, and one for front tilt. three-way heads have 3 axes and controls, one for bird’s-eye rotation, front tilt, and lateral tilt. The controls on these heads area unit sometimes handle that may be turned, to loosen or tighten the sure axis. this enables movement in one, a few, or none of the axes. once the movement of all axes of rotation is required, a ball head is employed. There area unit some pan-tilt heads that use gears, for preciseness management of every axis. this can be useful for a few forms of photography, like macro photography.

Other head
Other head sorts embrace the gimbal head, fluid head, gearhead, alt-azimuth, and equatorial heads. Fluid heads and equipment heads move terribly swimmingly, avoiding the unregularity caused by the stick-slip impact found in different forms of stand heads. Gimbal heads area unit single-axis heads utilized in order to permit a balanced movement of camera and lenses. This proves helpful in life photography similarly as in the other case wherever terribly long and significant photograph lenses area unit adopted: a gimbal head rotates a lens around its center of gravity, therefore giving simple and swish manipulation whereas pursuit moving subjects.

Fixed tripods
For low-angle shots significantly in filming, short tripods with fastened length legs and no center column are also used. an all-time low of those is named an occasional hat, with a slightly higher version brought up as a hi-hat.

Travel tripods
A travel tripod is one that has been designed to suit sure criteria as well as lightness to provide the artist the liberty to travel and carry his/her stand for extended periods. The tripod should be little and light-weight enough to be carried as hand baggage nevertheless has enough strength to support an expert DSLR and quick camera lens.
There are some typical specifications for a travel tripod. The tripod legs would be up to 0.9 to 1.8 kg or (2 to 4 lbs) and height(pulled up)12 to 20 inches or (30 to 50 cm) or height (extended)60 to 70 inches (152 to 178 cm) and carry maximum load up to 2.3 to 4.6 kg or 5 to 10 lbs.


ZOMEI 55″ Compact Light Weight Travel Portable Folding SLR Camera Tripod for Canon Nikon Sony DSLR Camera Video with Carrying Case(Blue)

The ZOMEI55” compact lightweight portable folding SLR camera tripod is suitable for the photographer can carry easily. The tripod itself stands approximately 55 inches high and pulled up size 20 inches high. The tripod has three easily adjustable aluminum alloy legs which include three flip locks for adjusting the size of each leg. You will get a very steady platform because the tripod has self-adjusting legs which work great outdoors on uneven surfaces.
The tripod has a center column and also has a hook that hangs weights on to lower and the center of gravity on this tripod to make it more strong and less apt to vibrations and a great stability where you take long exposures and that awesome for photography.
The ultra-compact lightweight tripod made of lightweight material. It’s a portable multi-directional and multi-functional tripod supports up to 11 lbs and its self-weight just 2.6 lbs and its perfect for packing around.


Mactrem PT55 Travel Camera Tripod Lightweight Aluminum for DSLR SLR Canon Nikon Sony Olympus DV with carrying Bag -11 lbs(5kg) Load ( Orange)

The Mactrem PT55 travel lightweight camera tripod is suitable for SRL and DSLR made of high-quality aluminum alloy tube and engineering plastic. The tripod weighs just 2.6 pounds and it can hold load up to 11 pounds. This compact tripod is easy to fit into the provided carrying case.
The tripod has 3-way Pan Head which offers you to 360-degree swivel function and also has a double holder for optional Pan Head that keeps your camera safe by remaining steady.
The tripod has universal quick release plate which you can attach/detach your camera in seconds. This tripod with four section lever lock legs which you can easily adjust the legs for outdoors on uneven surfaces. The tripods center gear is extendable and the rubber feet will help you for stability on different surfaces.


AmazonBasics 60-Inch Lightweight Tripod with Bag

The Amazon Basics lightweight tripod made of aluminum alloy. Its weight just 3 lbs and hold weight up to 6.6 lbs is recommended for optimal performance. Its pulled up size 25 inches and extendable up to 60 inches when the center post is fully extended. The tripod has adjustable legs and rubber feet that help you for stability on different surfaces. This tripod is compatible with scopes, GoPro devices, video cameras, digital cameras and still cameras.
The tripod has two built-in bubble view levels and 3- way head that allows for tilt and swivel motion. It has quick release mounting plate that helps you to ensure the fast transition between shots.


AmazonBasics 50-Inch Lightweight Tripod with Bag

The Amazon Basics 50 inches lightweight tripod helps you to capture vivid, professional style photographs.Adjustable height of the tripod makes it easy to achieve stability and score just right angle when you going after that award-winning shot. The unique user-friendly feature is you can accommodate this handy tripod a wide range of digital, video and still camera.
The tripod has a 3-way head that allows for full panoramic possibilities with 360-degree swivel function. Easily change the camera orientation from portrait to landscape.
It has quick release mounting plate that helps you to ensure the fast transition between shots and for quickly moving from one location to another location.
This tripod with three section lever lock legs which you can easily adjust the legs for outdoors on uneven surfaces. The tripod is extendable up to 50 inches and the rubber feet will help you for stability on different surfaces.


Leave A Reply